include <TargetPcb.scad>
include <config.scad>

// test values:
//wallTh = 1.2;

//noPcbPrev = true;

if (is_undef(noBodyPrev) || noBodyPrev == false) {
    caseBodyDrilled();
}


// -------------------

module caseBody() {
    
    caseBase();
    caseWallsCut();
    pcbBackings();
    drillBoxes();
}

module caseBodyDrilled() {
    difference() {
        caseBody();
        caseDrillVoids();
    }
}


// --- base and walls ---

module caseBase() {
    cube([caseW, caseD, baseH]);
}

module caseBack() {
    translate([wallTh, 0, baseH])
        rotate(90, [0,0,1])
            cube([caseD, wallTh, caseH - baseH]);
}

module caseWallR() {
    translate([wallTh, 0, baseH])
        cube([caseW-wallTh*2, wallTh, caseH - baseH]);
}

module caseWallL() {
    translate([wallTh, caseD-wallTh, baseH])
        cube([caseW-wallTh*2, wallTh, caseH - baseH]);
}

module caseFront() {
    translate([caseW, 0, baseH])
        rotate(90, [0,0,1])
            cube([caseD, wallTh, caseH - baseH]);
}

// --- cuts ---

module dcCut() {
    dcCutD = wallTh*3;
    translate([dcCutD/2 + caseW, wallTh + pcbD/2-dcCutW/2-0.3, pcbZ+dcCutBottomPad])
        rotate(90, [0,0,1])
            cube([dcCutW, dcCutD, dcCutH+eps]);
}

module caseWallRCut() {
    translate([pcbBackMargin,
                    -eps,
                    baseH + pcbBottomMargin + 2])
        cube([pcbRightTerminalCut, wallRCutD, wallRCutH]);
}


module caseWalls() {
    caseBack();
    caseWallR();
    caseWallL();
    caseFront();
}

module caseWallsCut() {
    difference() {
        caseWalls();
        dcCut();
        caseWallRCut();
    }
}

// --- insides ---

module pcbBackings() {
    // rigth
    translate([backingX, wallTh, baseH]) {
        cube([backingW, backingD, backingH]);
    }
    
    // left
    translate([backingX,
                    caseD-pcbLeftMargin-backingD,
                    baseH]) {
        cube([backingW, backingD+pcbLeftMargin-wallTh, backingH]);
    }
    
    // back
    translate([wallTh, wallTh + pcbD/2-espBackingD/2, baseH]) {
        cube([pcbBackBackingW, espBackingD, backingH]);
    }
}

module drillTube(h) {
    cylinder(h, d=drillBoxW);
}

module drillBox(h) {
    // use center positioning for tube compatiblility 
    translate([-drillBoxW/2, -drillBoxW/2, 0])
        cube([drillBoxW, drillBoxW, h]);
}

module drillBoxes() {
    translate(drillings[0]) {
        drillBox(caseH-baseH);
    }
    translate(drillings[1]) {
        drillBox(caseH-baseH);
    }
}

// --- drillings ---

module drillVoid(h) {
    cylinder(h, d=printedDrillD, $fn=drillFn);
}

module caseDrillVoids() {
    translate(drillings[0]) {
        drillVoid(caseH*1.5);
    }
    translate(drillings[1]) {
        drillVoid(caseH*1.5);
    }
    translate(drillings[2]) {
        drillVoid(caseH*0.5);
    }
}